When plumbing installations have problems, there is no other solution than to change them. Among the plumbing tools, taps are the ones that wear out quickly due to the frequency of use. The good news is that you can change that faucet without the help of a plumber. Here's how to do it with this article.
Take certain steps
To change your sink faucet, you need to start by taking some measurements. If you want more details, find it here. This is the step that comes right after finding the right kind of faucet for you. You need to choose the faucet carefully. To achieve this, you need to choose the faucet taking into account the distance between the centre of the faucet holes. Note that it is very important to know the diameter of the tap.
Examine the pipes
The condition of the pipework should be checked before any tap is replaced. It should be noted that the supply and connection pipes should be checked. To do this, loosen the drain pipe to see if the sealing washers are still worn. If you notice that the washers are no longer functional, the pipework should be changed as well.
Cutting the water supply hose
It is time to replace your tap. But first, you need to turn off the water supply. Don't do this if you don't have the necessary equipment. Now, when you have these materials, turn off the water supply outside the house. Once the supply is cut off, proceed to open the tap to drain the water from it.
Remove the old tap
When you are satisfied that the remaining water in the pipework is drained, you will then remove the old tap. To prevent water from running into your kitchen, place a bucket of water. Sinks often have an actuator. Please remove it.
Installing the new tap
To finish your work, you will place the new tap. You must make sure that the tap is securely fastened to prevent water leaking out. Do a small test to see if the job is well done.